(Lake Martin Specific)
111,183 messages
Updated 6/9/2024 1:00:09 PM
Lakes Online Forum
83,676 messages
Updated 6/14/2024 7:34:26 PM
Lakes Online Forum
5,197 messages
Updated 6/10/2024 5:39:11 AM
(Lake Martin Specific)
4,171 messages
Updated 5/29/2024 10:51:34 PM
Lakes Online Forum
4,170 messages
Updated 6/10/2024 6:29:37 PM
Lakes Online Forum
4,261 messages
Updated 5/28/2024 6:31:10 AM
Lakes Online Forum
2,977 messages
Updated 6/10/2024 6:30:23 PM
(Lake Martin Specific)
169 messages
Updated 5/31/2023 1:39:35 PM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
|
|
|
Name: |
diverdown
-
|
|
Subject: |
97 Seadoo GS
|
Date:
|
7/13/2009 3:33:17 PM
|
I purchased a 97 GS Sea Doo about 4 years ago. It has a 85 HP 2 Cycle Rotax. I have just now gotten the oil in the tank low enough to having to add some since I purchased it. Not knowing what the person added before, I can buy the SeaDoo brand..assuming that is what they had. Or...I have 2 Gallons of Yamalube for 2 Cycles. Anyone know if it would be ok to just use the Yamalube since I have it...
|
Name: |
wedoseadoo
-
|
|
Subject: |
97 Seadoo GS
|
Date:
|
7/16/2009 9:12:24 AM
|
I would not mix oils,the reason being that some oils when mixed together gel up and stop up the oil pump,if you are dealing with an unknown then drain the tank completely ,fill with the oil you want to use, loosen the bleed screw on the oil pump to let the rest of the old oil out of the lines to the pump drain out,then tighten the bleed screw back up and you are good to go.
|
|
|