Boat Maintenance: Remove 2-stroke oil pump and premix.
(Hatchet Creek Specific)
0 messages
Updated
Lakes Online Forum
83,755 messages
Updated 7/18/2024 8:20:58 PM
Lakes Online Forum
5,198 messages
Updated 6/19/2024 3:45:44 AM
(Hatchet Creek Specific)
0 messages
Updated
Lakes Online Forum
4,171 messages
Updated 6/27/2024 7:05:46 AM
Lakes Online Forum
4,261 messages
Updated 5/28/2024 6:31:10 AM
Lakes Online Forum
2,979 messages
Updated 6/26/2024 5:03:03 AM
Lakes Online Forum
98 messages
Updated 4/15/2024 1:00:58 AM
Hatchet Creek Photo Gallery





    
Welcome, Guest Select View Mode: [ classic | beta | recent ]
Name:   Pontoonfisher The author of this post is registered as a member - Email Member
Subject:   Remove 2-stroke oil pump and premix.
Date:   4/18/2019 7:26:16 PM

Just purchased 2001 Merc 40hp 2 cyl. with low hours. Less than 40.  I have owned several two strokes in the past and never bypassed the oil pump and pre mixed.  Thinking about doing it with this one.  Just wondering the best way. I’m going to remove the linkage from the carb to the oil pump.  Connect the fuel line directly to fuel pump. My debate is to fill the oil pump with synthetic motor oil and connect the input and output ports to circulate the oil or just pull the oil pump gear.  I’m leaning towards pulling the oil pump gear and plugging the oil pump ports.  Anyone done this?  Thoughts?

Other messages in this thread:View Entire Thread
Remove 2-stroke oil pump and premix. - Pontoonfisher - 4/18/2019 7:26:16 PM
     Remove 2-stroke oil pump and premix. - Pontoonfisher - 4/19/2019 7:46:04 AM





About Us
Contact Us
Site Map
Search Site
Advertise With Us
   
Hatchet.DiscoverRivers.com
THE HATCHET CREEK WEBSITE

Copyright 2024, Discover Rivers
Privacy    |    Legal